220Wp Kit with Victron Energy 330Ah Battery & 12V-230V Inverter 12/1600

Product number: JaDa95049841926411

Are you going away this year with your boat, caravan, or camper and don’t want to run out of power?
Then this solar panel set is ideal, as the solar panels automatically charge your battery.
The set is very easy to connect, even if you have no experience with solar panels. This is because the set is plug-and-play.
In addition, the set comes with step-by-step instructions, a schematic diagram, and a manual for the charge controller. If you have any questions, we are always here to help!
Through the Victron Energy app, you can see how much power the solar panels generate. The solar kit comes with a battery, a 12V-230V inverter, and all the cables needed for installation.

This set includes

• 2 x JaDaStroom flexible solar panel 110Wp
• 1 x MPPT charge controller Victron Energy 75/15 with Bluetooth (manual included)
• 2 x Victron AGM Battery 12V/165Ah
• Victron Phoenix Smart Inverter 12/1600 230V
• 1 x schematic diagram
• 1 x roof cable gland
• 5 meters red cable (from solar panel to charge controller)
• 5 meters black cable (from solar panel to charge controller)
• 2.5 meters red cable (from charge controller to battery)
• 2.5 meters black cable (from charge controller to battery)
• 1.5 meter red cable (cable from battery to 12V-230V inverter)
• 1.5 meter black cable (cable from battery to 12V-230V inverter)
• 30 cm red cable (between the two batteries)
• 30 cm black cable (between the two batteries)
• All cables are fitted with connectors
• Always technical support by JaDaStroom

Information about the panel:

• Maximum Power (Pmax) 110Wp
• Open Circuit Voltage (Voc) 24,50V
• Short Circuit Current (Isc) 5,53A
• Maximum Power Voltage (Vmp) 20,9V
• Maximum Power Current (Imp) 5,27A
• Dimensions: 108 * 54 * 0.2cm
• Solar panel cable length: 30cm
• Weight: 2kg
• Panel is flexible
• Monocrystalline
• Brand: JaDaStroom

Information about the charge controller
With the MPPT charge controller from Victron Energy, you increase energy output by 30% compared to PWM controllers, and the Victron Energy MPPT controller is also 10% more efficient than slower MPPT controllers. The charge controller comes with a manual, available in Dutch and English. You can also see the solar panel output via the Victron Energy app, called “VictronConnect,” which is easy to download from the App Store and Play Store. In addition, a fuse is built into the charge controller.

Battery information

Technology: AGM
Nominal battery capacity (Ah)*: 165
Battery voltage (V): 12
Connection: copper
Dimensions LxWxH (mm): 485 x 172 x 240
Weight (kg): 47
CCA at -18°C (0°F): 600
RES CAP @80°F: 220

* Nominal capacity: 20-hour discharge at 25°C

Information about the 12V-230V inverter

With this pure sine wave DC/AC inverter, 12 VDC is converted to 230 VAC for devices with a continuous power of 1300W (peak power 2400W). The inverter features integrated Bluetooth and a VE.Direct communication port.

The Phoenix 1600VA inverter is highly suitable for devices that require high starting power, such as refrigerators and freezers. Commonly used in motorhomes, boats and commercial vehicles. Suitable for appliances like Senseo, Nespresso, microwaves, kettles and other household devices.

Information about the cable

• The cable contains all connectors for the connection. In addition, a fuse is built into the cable.
• Cable from solar panel to charge controller is 4mm².
• The cable from the charge controller to the battery is 6 mm². This cable includes a fuse.
• The cable from the battery to the 12V-230V inverter is 70 mm². This cable includes a fuse.

Information about the roof cable gland
Provides the ability to bring the cable into the caravan or boat without letting water in.

Good to know

• The panels can be mounted with sealant or via the side mounting points
• This set is for a 12V system
• If you wish to connect devices directly to the batteries, please consult us first. You may need a thicker cable. This is for safety reasons.
• For the cable from the battery to the 230V inverter: always connect the fuse side to the battery.

Why choose us?

JaDaStroom offers a complete solar panel kit at a competitive price. In addition, you can always contact us with questions, both before and after your purchase. We stand for quality and have deliberately chosen a weather-resistant panel. This is also reflected in the Victron Energy charge controller, one of the best brands on the market.

Additional information
The charge controller is suitable for the following batteries: lead-acid, Lithium LiFePO4 with internal BMS, AGM, and GEL batteries.

Never connect 2 different types of panels to one charge controller, meaning panels with different specifications. For safety and efficiency reasons.

The solar panels can become hot. Make sure the surface on which the panels are placed can withstand this. Otherwise, the paint may, for example, bubble.

If you are using sealant for the installation: choose a heat/UV-resistant sealant, for example Sikaflex 252 (also check if the sealant can adhere to your surface).